Viewfinder Cine 1.1.1 camera support update released

★ Added all RED ONE acquisition formats, so the full list now is: 2K, 2K 2:1, 2K Anamorphic, 3K, 3K 2:1, 3K Anamorphic, 4K, 4K 2:1, 4K Anamorphic, 4K HD, and 4.5K. 1.3x anamorphic lenses are supported in all 16:9 aspect formats.
★ The old RED ONE camera that became RED ONE 4K was resized per RED's specifications of the chip's active imaging area (which is slightly smaller than the chip’s dimensions used before). Button labels will be unchanged, so you will still get REDONE as a label, but it will use the correct new dimensions. If you want the new default name on your existing buttons simply set an empty button label text on them.

Thanks to RED for all these clarifications.

★ Added support for the new ARRI ALEXA camera in both ARRIRAW and HD modes. 1.3x and 2x anamorphic lenses are supported in all these modes.
★ Added support for ARRI D-21 HD mode (so that you no longer have to set the aspect ratio to 16:9 manually if you use a D-21 for HD recording). Of course 1.3x anamorphic lenses are supported in this mode.
★ ARRI D-20 and D-21 anamorphic format dimensions were changed to reflect the standard 2.39:1 aspect ratio (so that you no longer have to set the aspect ratio manually if you record in this mode).

★ The "2x" text in front of standard anamorphic format names was removed to increase readability.
★ Anamorphic formats are now marked with an "ana" postfix on default button labels instead of the former "-2" postfix. 1.3x anamorphic formats are still marked with the "-1.3" button label postfix. This will not change your existing button labels. If you want the new default names on your existing buttons simply set an empty button label text on them.